Showing 1–10 of 11 results

TIME 5000 Digital

TIME 5000 Digital

  • Output up to 500 A
  • 30 % faster deposition rate
  • For heavy-gauge sheets

The TIME Process is a tried and tested high-performance welding process for manual and mechanised applications that has been doing sterling service in industry for many years. By “high-performance”, we mean a welding process that achieves either a deposition rate of at least 8 kg/h, or a wirespeed of at least 15 m/min with 1.2 mm steel wire.

Time 5000, a digitised high-performance welding process with all the associated benefits: 100 % reproducible welding results, modular system principle, digital microprocessor control and outstanding weld properties.

30 % more productivity when welding thick steel sheets thanks to increased wire feed speed or higher deposition rate.

MORE INFO BROCHURE

TPS/i Trans Process Solution

TPS/i Trans Process Solution

  • from 320amp
  • modular design concept
  • Non-pulsed & Pulsed Arc capable
  • Easily upgradable
  • Networkable

The TPS/i is a universal genius. It was conceived and designed from first principles, from the ground up. As a result, it has decisively improved the welding properties, optimised the communication between man and machine, and perfected the handling. Its modular design concept makes it easy to adapt it to users’ individual welding-needs. With the TPS/i, we have already arrived in the future of welding.

MORE INFO BROCHURE

TPS2700 Cold Metal Transfer

TPS2700 Cold Metal Transfer

  • Portable pulse welding with 270 A
  • Capable of welding aluminium sheet from 0.3 mm
  • For manual and robot applications

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG and electrode welding.

CMT stands for Cold Metal Transfer. The wire movement is incorporated into the process control, where heat is inserted only very briefly. Metal transfer takes place with barely any flow of current. The result is spatter-free MIG/MAG welding and brazing of thin sheets (0.3 mm or thicker), MIG brazing of galvanised sheets and the joining of steel and aluminium.

MORE INFO BROCHURE

TransPuls Synergic 2700

TransPuls Synergic 2700

  • Portable pulse welding with 270 A
  • For manual MIG/MAG applications
  • Output of up to 270 A
  • Push/Push units available for Aluminium

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, DC TIG and electrode welding.

With the TransPulsSynergic 2700, pulse welding becomes portable. Highest precision, exact reproducibility and best weld properties, anytime, anywhere.

MORE INFO BROCHURE

TransPuls Synergic 3200

TransPuls Synergic 3200

  • Pulse welding up to 320 A
  • For manual and robot applications
  • Wire feed unit external to power source

The TransPuls Synergic 3200 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 320 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The multiprocess power source is suitable for MIG/MAG, DC TIG and electrode welding, as well as manual or robotic applications.

Pulse welding with 320 A, highest precision, exact reproducibility and best weld properties, anytime, anywhere.

MORE INFO BROCHURE

TransPuls Synergic 4000

TransPuls Synergic 4000

  • Pulse welding up to 400 A
  • Microprocessor-controlled synergic operation
  • For industrial use
  • PCS (Pulse Controlled Spray Arc)

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 400 A, the TransPuls Synergic 4000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, in shipyards and Boat Building. The multiprocess power source is suitable for MIG/MAG, DC TIG and electrode welding, as well as manual or robotic welding applications.

Pulse welding with 400 A, highest precision, exact reproducibility and best weld properties, ideal for industrial use.

MORE INFO BROCHURE

TransSteel 3500

TransSteel 3500

  • Robust Design for Site Use
  • Steel Transfer Technology
  • High Duty Cycle: 100% @ 250amps, Capable of up to 350amp
  • Manual or Synergic Wire feed units available
  • Modular Design, can also be water-cooled

In structural-steel fabrication, reliability is the name of the game. This, in turn, necessitates sturdy, rugged tools. The same is true of steel welding. TransSteel has been created with precisely this in mind: a rugged and reliable partner that stands out for its intelligent appliance design and for being extremely easy to operate. Digitally controlled and primed with expert knowledge, the TransSteel welding system is ready, willing and able to deliver superlative steel welding, and guarantees 100 % system performance!

MORE INFO BROCHURE

TransSteel 3500 Compact

TransSteel 3500 Compact

  • Robust Design
  • Steel Transfer Technology
  • Capable of 350amp
  • Built in Wire feeder

The TransSteel 3500 Compact combines a compact design with digital welding technology and expert know-how. Thanks to its built-in wirefeeder, this welding power source is an ideal space-saving and resource-conserving solution, especially for workshop operations.

The digitally controlled TransSteel 3500 Compact ensures 100 % reproducible results. Its made-to-measure welding characteristics, designed especially for structural-steel fabrication, deliver precise ignition and perfect welding behaviour.

MORE INFO BROCHURE

TransSteel 5000

TransSteel 5000

  • Robust Design for Site Use
  • Steel Transfer Technology
  • 500amp Maximum Current
  • Manual or Synergic Wire feed units available
  • Optional Water-Cooling

In structural-steel fabrication, reliability is the name of the game. This, in turn, necessitates sturdy, rugged tools. The same is true of steel welding. TransSteel has been created with precisely this in mind: a rugged and reliable partner that stands out for its intelligent appliance design and for being extremely easy to operate. Digitally controlled and primed with expert knowledge, the TransSteel welding system is ready, willing and able to deliver superlative steel welding, and guarantees 100 % system performance!

MORE INFO BROCHURE

VarioStar 1500/2500/3200

VarioStar 1500/2500/3200

  • 3 Models available 150amp, 250amp & 320amp
  • Robust design
  • Stepped up to 150, 250 or 320 A

The VarioStar is a step-switched MIG/MAG welding machine, so it always delivers highly reliable welding results, of impeccable quality. Particularly when used on light-gauge sheets, these machines stand out for the exceptionally good welding results that they achieve.
Optimally harmonised for both mixed gas and CO2.
Whichever way you look at it, the VarioStar 1500 / 2500 / 3100 is a worthwhile investment that quickly pays for itself.

BROCHURE