Showing 1–10 of 17 results

Placeholder

Proxon 50000 BondCoat

Proxon 50000 BondCoat

Proxon 50000 Bond coat produces a continuous network of tiny micro-welds that bond securely to the substrate and provide a rough, strong surface that is ideal for accepting RotoTec or Meta Ceram final coat powder alloys.

BROCHURE
Placeholder

CastoPlast 31200

CastoPlast 31200

CastoPlast 31200, consists of Polymide 11 which has the appearance of a powder, is designed for use as a coating to protect metal components against corrosion, and is applied by thermal spraying.

BROCHURE
Placeholder

DuroTec 29021

DuroTec 29021

29021 is manufactured by a special process of atomisation which allows control of both granulometry and morphology, in relation to the specific system chosen (RotoTec 800 or CastoDyn DS 8000).

A nickel-chromium based alloy, 29021 is designed for hard protective coatings resistant to metal on metal friction and various types of corrosion. Machinable with tungsten carbide tipped tools. For the protective coating of various alloys, steels and other industrial materials with no distortion of the work piece or alteration to its dimensions or structure.

BROCHURE
Placeholder

MetaCeram 29011

MetaCeram 29011

The alloy MetaCeram 29011 is a protective coating alloy with a deposit that resists atmospheric corrosion and metal/metal friction. It is also recommended for applications where easy machining is required. The deposit also has excellent anti-seizing properties.

BROCHURE
Placeholder

23025

23025

23025 is a nickel based MicroFlo alloy combining ductility, corrosion resistance and machinability. It is used for protection and rebuilding. Its excellent wetting properties makes it possible to use it on a wide variety of ferrous metals such as steel, stainless steel and cast iron. Deposits are almost free of porosity and can be machined to a high finish.

BROCHURE
Placeholder

MetaCeram 23005

MetaCeram 23005

MetaCeram 23005 is a Nickel based alloy containing additional carbides; deposits exhibit an even distribution of these carbides in a tough wear resistant matrix. Designed for resistance to wear by particle abrasion both in dry and wet form.

BROCHURE
Placeholder

Proxon 21071

Proxon 21071

Proxon 21071 is for the protective coating of various alloys, steels and other industrial materials.

No distortion of the work piece or alteration to its dimensions and structure.

Unaffected by residual stresses. Homogeneous deposit hardness. Excellent sliding characteristics. Good corrosion resistance. Easy to machine.

BROCHURE
Placeholder

Proxon 21032S

Proxon 21032S

Proxon 21032S is a nickel-based alloy developed specifically for spray delivery systems such as the RotoTec 800, TeroDyn 2000 or CastoDyn DS 8000.

For the protective coating of various alloys, steels and other industrial materials. Unaffected by residual stresses. Suitable for coating on large surfaces. Excellent sliding characteristics. Easy to machine. Excellent bonding. Homogeneous deposit hardness. Excellent resistance to corrosion at high temperature. No distortion of the work piece or alteration to its dimensions and structure.

BROCHURE

DiaMax 10999

DiaMax 10999

Tungsten Carbibe Eutalloy Spray Powder

Eutalloy Xuper Diamax 10999 is unique in its ability to take a very high polish. Unlike conventional tungsten carbide type alloys, the deposits of Xuper Diamax 10999 can be polished to an extremely fine micron finish with a single pass of a grinder. The high polish which can be achieved is unmarred by large, un-dissolved surface carbides. The resulting mirror like surface produces an extremely low co-efficient of friction, reducing wear in metal to metal applications.

BROCHURE

ChromTec 10680

ChromTec 10680

High strength nickel based alloy for dies, conveyors, impellers, moulds

ChromTec 10680 is a high strength, machinable, nickel base alloy for joining, cladding, building up and sealing carbon and low alloy steels, stainless steels, nickel base alloys and cast iron.

BROCHURE